2009-Newer Challenger M9 Rear Solid Axle Sub Frame Kit!
M9HP11
The New Solid Axle Package is designed to replace the independent
rear end assembly in the Dodge Challenger. This package is based on
the highly successful Moser M9 Fabricated housing and gives you
everything you need to build serious power without breaking like the
OEM rear. This unit still gives you a rear that can handle street driving
and the reliability to go well beyond the limitations of even the best
independent rear end upgrades. Reliability and tunability for the serious
racers that are building serious power.
Features:
• M9 Fabricated Moser Housing w/Back Brace
• Moser Custom Race Axles
• Moser Subframe Assembly
• Anti-Roll Assembly
• Torque Arm
• Track Locators
• Lower Control Arms
• Subframe Connector w/Torque Arm Connector
• Optional Thru Bolt Aluminum Moser Center Section
• Optional Shocks/Springs
*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE IS REQUIRED!
$6,723.00
*The Moser Engineering "Challenger" Rear Sub Frame Kit!
Fits:
2009 - 2010 - 2011 - 2012 - 2013 - 2014 - 2015 - 2016 - 2017 - 2018 - 2019 Challenger
*Kit ships within 3 weeks of online order completion!
The standard kit includes the following;
M9 Fabricated Mild-Steel 9" Housing (Includes Back Brace)
Moser Alloy Axles
1/2" Wheel studs
Sealed Axle Bearings
Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
All Associated Hardware is supplied!
Additional Components required but not supplied in the standard M9 kit:
CENTER SECTION (3RD MEMBER)
BRAKES
DRIVESHAFT
SHOCKS
REAR END FLUID
*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE IS REQUIRED!
Challenger Instuctions
Fits:
2009 - 2010 - 2011 - 2012 - 2013 - 2014 - 2015 - 2016 - 2017 - 2018 - 2019 Challenger
*Kit ships within 3 weeks of online order completion!
The standard kit includes the following;
M9 Fabricated Mild-Steel 9" Housing (Includes Back Brace)
Moser Alloy Axles
1/2" Wheel studs
Sealed Axle Bearings
Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
All Associated Hardware is supplied!
Additional Components required but not supplied in the standard M9 kit:
CENTER SECTION (3RD MEMBER)
BRAKES
DRIVESHAFT
SHOCKS
REAR END FLUID
*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE IS REQUIRED!
Challenger Instuctions
Related Products
$1,375.00
3M
Moser Engineering builds the strongest center sections available in the marketplace. Moser gives you many options from a Moser Stock Case to an Aluminumn Thru-bolt design all the way up to our Strongest Nodular case that can handle it all. Build the Center Section that you need and get that power to the ground. All our cases are good for street and or strip use.
*This item will ship two business days after online transaction is completed unless you have requested powder coating this service will add an 2 - 3 days to the process.
$1,540.00
$1,240.00
3N
***OVERSTOCK CASES***
Most of these cases were purchased as emergency stock during the height of the pandemic to ensure we had product to service our customers in the event we would not be able to produce our own cases.
Moser Engineering builds the strongest center sections available in the marketplace. Select your options and build the Center Section that you need and get that power to the ground. All our cases are good for street and or strip use.
*This item will ship two business days after online transaction is completed unless you have requested powder coating this service will add an 2 - 3 days to the process.
