Moser M9 Fabricated 9" Housing
7H9FDR
Moser M9 Fabricated 9" Ford Housing The Can (Housing without tubes) is 15 1/4" wide.
$967.00
M9 Fabricated Housings are made from 1/8 thick laser cut mild steel and 3" DOM seamless tubes standard. The Can (Housing without tubes) is 15 1/4" wide.What differentiates the M9 Drag housing from others brands available is the fact the Moser M9 Housing is fabricated from one triangulated piece of metal. This helps reduce deflection caused from torsional force at launch, which helps with a straighter and more consistent launch. Other standard strengthening components added to the Moser M9 Housing includes; internal gussets and bulk heads, and a 3/8" thick face plate, reinforced gussets and bulk head for superior strength. Also included are custom machined fill and drain vent, Center Section Stud Kit, and installed Housing Ends. Don't settle for weak racing rear ends. Upgrade to the best!
This part represents a bare housing with no bracketry installed!
The Face Plate is shifted on the Moser M9 meaning that Centered Pinion on the Moser M9 Housing is also Centered Housing unlike an OEM 9" Housing.
Unit ships bare metal finish.
This part represents a bare housing with no bracketry installed!
The Face Plate is shifted on the Moser M9 meaning that Centered Pinion on the Moser M9 Housing is also Centered Housing unlike an OEM 9" Housing.
Unit ships bare metal finish.
Related Products
$3,069.00
3M
Moser Engineering builds the strongest center sections available in the marketplace. Moser gives you many options from a Moser Stock Case to an Aluminumn Thru-bolt design all the way up to our Strongest Nodular case that can handle it all. Build the Center Section that you need and get that power to the ground. All our cases are good for street and or strip use.
*This item will ship two business days after online transaction is completed unless you have requested powder coating this service will add an 2 - 3 days to the process.
$1,375.00
3M
Moser Engineering builds the strongest center sections available in the marketplace. Moser gives you many options from a Moser Stock Case to an Aluminumn Thru-bolt design all the way up to our Strongest Nodular case that can handle it all. Build the Center Section that you need and get that power to the ground. All our cases are good for street and or strip use.
*This item will ship two business days after online transaction is completed unless you have requested powder coating this service will add an 2 - 3 days to the process.
$1,483.00
$1,335.00
3MNS40AN430
***OVERSTOCK***
These are 3rd members that were built and canceled or returned for credit. All Center Sections are brand new units!
Unit includes:
Moser Performance 3.250" Nodular Iron Case
40 Spline Steel Spool
1350 series Chrome Moly Pinion Yoke
Nodular Iron Daytona Pinion Support
4.30:1 US Gear 8620 Pro/Street Ring & Pinion
Moser Engineering builds the strongest center sections available in the marketplace. All our cases are good for street and or strip use.
*This item will ship same day if ordered before 1:00pm EST
$1,503.00
$1,355.00
3MNS35BA543
***OVERSTOCK***
These are 3rd members that were built and canceled or returned for credit. All Center Sections are brand new units!
Unit includes:
Moser Performance 3.250" Nodular Iron Case
35 Spline Steel Spool
1310 series Chrome Moly Pinion Yoke
Aluminum Daytona Pinion Support
5.43:1 US Gear 8620 Pro/Street Ring & Pinion
Moser Engineering builds the strongest center sections available in the marketplace. All our cases are good for street and or strip use.
*This item will ship same day if ordered before 1:00pm EST
