GM Chevy Special Car Economy Disc NON Parking Brake Kit
6100-A01-M
SAME DAY SHIPPING (if ordered before 2pm EST)
Axle Requirements:
Axle Hub Pilot Dimension: 2.770"
Axle Flange Diameter: 6.100"
$411.00
Moser Economy Disc Brakes utilize a single piston GM Metric Caliper, 11.25" Rotor, and Mounting Brackets for 10/12 Bolt Chevy Special Car Housing Ends that utilize the Big Ford 3.150" bearing. The kit comes with brackets that can be utilized for multiple brake offsets. Kits can be upgraded to include the addition of caliper hoses.
It is recommended that you run 15" or larger wheels with this kit. The use of wheels smaller than 15" could result in fitment issues.
Kits come with one pair of rotors, one pair of calipers, and one set of caliper brackets with enough spacers to accommodate multiple spacing offsets for the 10/12 Bolt Chevy Special Car Housing Ends.
*Please Note due to rotors being thicker than the common drum this kit may push your wheels out an additional .125" per side, and longer wheel studs may be required. Owners with staggered shocks on their vehicle should look at the 6100-A05-M brake kit to accommodate the staggered shock setup.
It is recommended that you run 15" or larger wheels with this kit. The use of wheels smaller than 15" could result in fitment issues.
Kits come with one pair of rotors, one pair of calipers, and one set of caliper brackets with enough spacers to accommodate multiple spacing offsets for the 10/12 Bolt Chevy Special Car Housing Ends.
*Please Note due to rotors being thicker than the common drum this kit may push your wheels out an additional .125" per side, and longer wheel studs may be required. Owners with staggered shocks on their vehicle should look at the 6100-A05-M brake kit to accommodate the staggered shock setup.
