A301619CDLY-1 - 2015-19 Chevrolet 3500 Series Dual Wheel Cab & Chassis Full Floater Alloy Axle
A301619CDLY-1
MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This part number represents 1 axle.
$243.00
Moser Full Float Direct Replacment Axle Fits; 2016, 2017, 2018 & 2019 Chevrolet 3500 Series Dual Wheel Cab & Chassis 2WD & 4WD
Part # A301619CDLY-1 (Works with Driver or Passenger Side)
GM Part: 23445894
Spline: 30 (1.545" OD)
Length of Spline: 7"
Length of Axle: 37 9/16" ("P" Dimension from Order Form: 37 3/16")
Bolt Pattern: 8 X 3.82"
Flange OD: 4.75"
Hole Diameter: .525"
Please Double Check your Axle Legnths and all Provided Dimensional Data against your OEM Axle Before Completing Your Order.
(Click Here for Order Form)
Part # A301619CDLY-1 (Works with Driver or Passenger Side)
GM Part: 23445894
Spline: 30 (1.545" OD)
Length of Spline: 7"
Length of Axle: 37 9/16" ("P" Dimension from Order Form: 37 3/16")
Bolt Pattern: 8 X 3.82"
Flange OD: 4.75"
Hole Diameter: .525"
Please Double Check your Axle Legnths and all Provided Dimensional Data against your OEM Axle Before Completing Your Order.
*These axles are forged and induction hardened utilizing our superior Custom Alloy material.
***PLEASE READ***Moser Engineering Alloy Floater Axles are NOT tapered like the stock axles. Be sure to check for clearance at the “X” points! You may have to open up the spindle hole on the factory housing as the factory didn't always bore the holes concentric to the spindle end. You also may have to grind a little from the snout end to allow for clearance. The axle should not rub anywhere or it could gauld. The Moser axles you have purchased are a pre-mium material and maximized for strength by keeping as much material as possible on the shaft. DO NOT machine the axles. Any alteration to the axles could severely weaken the shafts and cause damage or failure. Click here for the Product Disclaimer(Click Here for Order Form)