M9 Fabricated 2008 - 2009 Pontiac G8 & 2010 - 2015 Camaro (5th Gen) Rear Solid Axle Sub Frame Kit!

  • M9 Fabricated Gen 5 Camaro Rear Solid Axle Sub Frame Kit!
  • COPO_Camaro.jpg
  • 2008-pontiac-g8-photo-173024-s-986x603.jpg

M9GEN5

PRODUCT DESCRIPTION
The Moser Engineering rear sub frame kit for the 2010-15 Newer Camaro & 2008 & 2009 Pontiac G8!

Convert your street car into a COPO clone for a lot less money!
Fits:
2008 - 2009 Pontiac G8
2010, 2011, 2012, 2013, 2014 & 2015 Chevrolet Camaro
*Kit ships within 3 weeks of online order completion!

The standard kit includes the following;
M9 Fabricated Mild-Steel 9" Housing (includes Back Brace)
Moser Alloy Axles
5/8" Drive Stud Kit (2" or 3")
Sealed Axle Bearings
Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts and Spring Mounts.
All Associated Hardware is supplied!

Additional Components required but not supplied in the standard M9 kit: CENTER SECTION (3RD MEMBER)
BRAKES
DRIVESHAFT
SHOCKS
REAR END FLUID

*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!
**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!
***REMOVAL OF THE SPARE TIRE & CRADLE IS REQUIRED!

$6,723.00

The Moser Engineering "Gen V" Rear Sub Frame Kit!
Convert your street car into a COPO clone for a lot less money!
Fits:
     2008 - 2009 Pontiac G8
     2010 2011 2012 2013 2014 2015 Chevrolet Camaro
*Kit ships within 3 weeks of online order completion!
The standard kit includes the following;
                M9 Fabricated Mild-Steel 9" Housing (Includes Back Brace)
                Moser Alloy Axles
                5/8" Drive Stud Kit (2" or 3")
                Sealed Axle Bearings
                Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
                Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
                All Associated Hardware is supplied!
 
Additional Components required but not supplied in the standard M9 kit:
CENTER SECTION (3RD MEMBER)
BRAKES
DRIVESHAFT
SHOCKS
REAR END FLUID
 
*THIS KIT REQUIRES PROFESSIONAL INSTALLATION BY A CHASSIS/FABRICATION SHOP AND SHOULD NOT BE ATTEMPTED BY A NON-QUALIFIED INDIVIDUAL!

**OEM FUEL TANK MUST BE REMOVED, AN AFTERMARKET FUEL CELL IS REQUIRED!


***REMOVAL OF THE SPARE TIRE & CRADLE IS REQUIRED!