AXLE & AXLE PACKAGES

AXLE & AXLE PACKAGES

Shop By Department

246 Results

View All

Part # A103005 - 10 Bolt 30 spline C-Clip Axles - Fits 1991-92 Caprice & Roadmaster, 1993-96 Cap

$260.00

A103005

We begin with premium quality alloy steel that is forged in Moser designed tooling, induction heat-treated to optimize torsional strength, and 100% magnafluxed. These axles are non-tapered, with hardened bearing seats and machined c-clip grooves, to fit OEM applications. *There are more than a few variations to these applications, to insure correct fit remove the OEM axles and measure before ordering.

Add To Cart
Part # 8010 - 1/2" - 20 X 3" .625 Knurl

$22.50

8010

1/2" - 20 x 3" , .625 knurl, Press-In Grade 8 Wheel Stud.

Add To Cart
Part # A31-83BRN2 - 1983-92 Bronco II (4WD) - 31 Spline C-Clip Axles

$260.00

A31-83BRN2

We begin with premium quality alloy steel that is forged in Moser designed tooling, induction heat-treated to optimize torsional strength, and 100% magnafluxed. These axles are non-tapered, with hardened bearing seats and machined c-clip grooves, to fit OEM applications.

Add To Cart
Part # A3171MUST - 1971-73 Mustang Axles (DS & PS) 31 Spline

$370.00

A31-71MUST

We begin with premium quality alloy steel that is forged in Moser designed tooling, induction heat-treated to optimize torsional strength, and 100% magnafluxed. These axles are non-tapered, with hardened bearing seats to fit OEM applications.

Add To Cart
Part # A30-65GMTK - 1965-69 GM Truck (2WD & 4WD) Spline 30

$260.00

A30-65GMTK

Moser Engineering uses its finest alloy for these replacement shafts. This gives you a custom alloy shaft that has been induction heat treated, 100% magna-fluxed and has a hardened bearing seat for years of worry-free use. Most applications are stocked on the shelf and can ship same day if the order is placed before 1:00 EST.

Add To Cart
Part # A30-CST-E70 - 1970-74 E-Body, 8 3/4" Rear Axles, Stock Drum Brake -- 30 Spline

$370.00

A30-CST-E70

Moser Engineering uses its finest alloy for these replacement shafts. This gives you a custom alloy shaft that has been induction heat treated, 100% magna-fluxed and has a hardened bearing seat for years of worry-free use. Most applications are stocked on the shelf and can ship same day if the order is placed before 1:00 EST.

Add To Cart
Part # A35-71CUDA-60 - 1971-74 E-Body, Dana-60 Rear Axles, Stock Drum Brake -- 35 Spline

$370.00

A35-71CUDA-60

Moser Engineering uses its finest alloy for these replacement shafts. This gives you a custom alloy shaft that has been induction heat treated, 100% magna-fluxed and has a hardened bearing seat for years of worry-free use. Most applications are stocked on the shelf and can ship same day if the order is placed before 1:00 EST.

Add To Cart
Part # A31-80RAMC - 1980-84 1/2 Ram Charger, 100 & 150 Series P/U 4WD -- 31 Spline

$370.00

A31-80RAMC

Moser Engineering uses its finest alloy for these replacement shafts. This gives you a custom alloy shaft that has been induction heat treated, 100% magna-fluxed and has a hardened bearing seat for years of worry-free use. Most applications are stocked on the shelf and can ship same day if the order is placed before 1:00 EST.

Add To Cart
Part # 8080S - 5/8" - 18 X 2" Drive Stud Kit

$80.00

8080S

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # BPBD - Ball Bearing w/ 5/8" Drive Studs

$145.00

BPBD

Kit Includes; Sealed Ball Bearing (O-Ring Type) And 5/8" Drive Stud Kit (either 2" or 3")
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
PNC160-3750 - CTM U-Joint for Dana 60 Front Axle Shafts

$350.00

PNC160-3750

Moser Engineering & CTM have formed a partnership that no other two axle & u-joint manufactures can touch! Both the M/E Axles and the CTM U-Joints are manufactured from start to finish here in the U.S.A.
CTM U-Joints are the toughest U-joints you can buy! These patented, high grade forged steel u-joints are precision heat treated to stand up to the toughest environment you can throw at them!

Add To Cart
PNC144-1881 - CTM U-Joint for Dana 44 Front Axle Shafts

$255.00

PNC144-1881

Moser Engineering & CTM have formed a partnership that no other two axle & u-joint manufactures can touch! Both the M/E Axles and the CTM U-Joints are manufactured from start to finish here in the U.S.A.
CTM U-Joints are the toughest U-joints you can buy!! These patented, high grade forged steel u-joints are precision heat treated to stand up to the toughest environment you can throw at it!

Add To Cart
PNC160-3757 - CTM Dana 60 Rebuild Kit

$145.00

PNC160-3757

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # PNC144-1887 - CTM Dana 44 Rebuild Kit

$130.00

PNC144-1887

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9508B - Big Ford & Olds/Pontiac Ball Bearing

$65.00

9508B

Big Ford & Olds/Pontiac Ball Bearing

Add To Cart
Part # A103003 - 10 Bolt 30 Spline C-Clip Axles - Fits 1970-1981 Camaro, 1968-1972 Chevelle, El Cami

$260.00

A103003

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST).



*Requires aftermarket 30 spline carrier!

Add To Cart
Part # A102812 - 10 Bolt 28 spline C-Clip Axles - Fits 1973-77 Chevelle, El Camino, Malibu, Monte Ca

$260.00

A102812

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A103012 - 10 Bolt 30 spline C-Clip Axles - Fits 1973-77 Chevelle, El Camino, Malibu, Monte Ca

$260.00

A103012

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A102601 - 10 Bolt 26 spline C-Clip Axles - Fits 1978-81 Cutlass, El Camino, Grand Prix, Monte

$260.00

A102601

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102801 - 10 Bolt 28 spline C-Clip Axles - Fits 1978-81 Cutlass, El Camino, Grand Prix, Monte

$260.00

A102801

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102602 - 10 Bolt 26 Spline C-Clip Axles - Fits 1982-87 Cutlass, El Camino, Grand Prix, Monte

$260.00

A102602

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102810 - 10 Bolt 28 spline C-Clip Axles - Fits 1982-87 Cutlass, El Camino, Grand Prix, Monte

$260.00

A102810

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Requires 28 Spline Aftermarket Differential

Add To Cart
Part # A102808 - 10 Bolt 28 spline C-Clip Axles - Fits 1984-88 Buick Grand National, Olds Hurst

$260.00

A102808

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102604 - 10 Bolt 26 spline C-Clip Axles - Fits 1982-92 Camaro and Trans-Am

$260.00

A102604

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A102804 - 10 Bolt 28 spline C-Clip Axles - Fits 1982-92 Camaro and Trans-Am

$260.00

A102804

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102607 - 10 Bolt 26 spline C-Clip Axles - Fits 1982-02 S-10, S-15 (2WD)

$260.00

A102607

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102807 - 10 Bolt 28 spline C-Clip Axles - Fits 1982-02 S-10, S-15 (2WD)

$260.00

A102807

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102613 - 10 Bolt 26 spline C-Clip Axles - Fits 1982-02 S-10, S-15 (4WD)

$260.00

A102613

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A102813 - 10 Bolt 28 spline C-Clip Axles - Fits 1982-02 S-10, S-15 (4WD)

$260.00

A102813

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102805 - 10 Bolt 28 spline C-Clip Axles - Fits 1993-02 Camaro and Trans-Am w/ 3 Channel ABS

$260.00

A102805

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Works with both 3-Channel ABS or Vehicles without ABS.

Add To Cart
Part # A102806 - 10 Bolt 28 spline C-Clip Axles - Fits 1993-02 Camaro and Trans-Am w/ 4 Channel ABS

$315.00

A102806

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings

Add To Cart
Part # A882841 - 8.8" Ford 28 spline C-Clip Axles - Fits 1979-93 Mustang (4-lug)

$260.00

A882841

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A883141 - 8.8" Ford 31 spline C-Clip Axles - Fits 1979-93 Mustang (4-lug)

$260.00

A883141

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A883141A - 8.8" Ford 31 spline - Fits 1979-93 Mustang 4 lug (For Auburn LSD)

$260.00

A883141A

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



**For use with Auburn Limited-Slip Differential only!

Add To Cart
Part # A882851 - 8.8" Ford 28 spline - Fits 1979-93 Mustang (5- lug)

$260.00

A882851

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A883151 - 8.8" Ford 31 spline - Fits 1979-93 Mustang (5-lug)

$260.00

A883151

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A883151A - 8.8" Ford 31 spline - Fits 1979-93 Mustang 5 lug (For Auburn LSD)

$260.00

A883151A

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two days after online transaction is completed.



**For use with Auburn Limited-Slip Differential only!

Add To Cart
Part # A882842 - 8.8" Ford 28 spline - Fits 1993 Mustang Cobra 4 lug

$260.00

A882842

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Add To Cart
Part # A883142 - 8.8" Ford 31 spline - Fits 1993 Mustang Cobra 4 lug

$260.00

A883142

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A882852 - 8.8" Ford 28 spline - Fits 1994-98 Mustang 5 lug w/ABS adapter

$275.00

A882852

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings

Add To Cart
Part # A883152 - 8.8" Ford 31 spline - Fits 1994-98 Mustang 5 lug w/ABS adapter"

$275.00

A883152

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings

Add To Cart
Part # A883152A - 8.8" Ford 31 spline - Fits 1994-98 Mustang 5 lug w/ABS adapter (For Auburn LS

$275.00

A883152A

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



**Prepped for OEM Reluctor Rings

Add To Cart
Part # A882853 - 8.8" Ford 28 spline - Fits 1999-04 Mustang 5 lug w/ABS adapter

$275.00

A882853

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings

Add To Cart
Part # A883153 - 8.8" Ford 31 spline - Fits 1999-04 Mustang 5 lug w/ABS adapter

$275.00

A883153

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings

Add To Cart
Part # A883153A - 8.8" Ford 31 spline - Fits 1999-04 Mustang 5 lug w/ABS adapter (For Auburn LS

$275.00

A883153A

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



**Prepped for OEM Reluctor Rings

Add To Cart
Part # A882805 - 8.8" Ford 28 spline - Fits 2005 & newer Mustang w/ABS adapter

$400.00

A882805

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings



**Bearing Seat 1.618

Add To Cart
Part # A883105 - 8.8" Ford 31 spline - Fits 2005 & newer Mustang 5 lug w/ABS adapter

$400.00

A883105

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings



**Bearing Seat 1.618

Add To Cart
Part # 8000 - 1/2"- 20 x 3" Screw-In Stud

$22.50

8000

SAME DAY SHIPPING (if ordered before 2pm EST)



Add To Cart
Part # 8002 - 1/2" - 20 x 2" Screw-In

$22.50

8002

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8020 - 1/2" - 20 x 3" .685" Knurl, Press-In Wheel Stud

$22.50

8020

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8030 - 1/2" - 20 x 1 1/2" 6.25" knurl, Press-In Stock Ford

$17.50

8030

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8040 - 1/2"- 20 x 1 1/2" .665" Knurl, Press-In

$17.50

8040

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8050 - 7/16" - 20 x 2 7/8" (.480 Knurl, Press-In Stud)

$22.50

8050

Thread: 7/16" - 20



Length: 2 7/8"



Knurl: .480"

Add To Cart
Part # 8060 - 7/16" - 20 x 1 1/4" .480" Knurl Press-In Stud

$17.50

8060

Thread: 7/16" - 20



Length: 1 1/4"



Knurl: .480"

Add To Cart
Part # 8368 - 1/2" - 20 x 1 3/4" .625" Knurl Mustang

$17.50

8368

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8070 - 1/2" -20 x 3" All Thread Front Disc Brake Stud

$22.50

8070

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8081 - 5/8" - 11 x 2 1/2" (Quick Start end) .685" knurl (Set of 10 Studs)

$30.00

8081

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8082 - 5/8"- 18 x 2 1/2" (Quick Start end) .685" knurl (Set of 10 Studs)

$45.00

8082

5/8" - 18 x 2.5"(Quick Start end) .685" knurl, Grade 8 Circle Track Fine Wheel Stud.

Add To Cart
Part # 8138 - 1/2" - 20 x 1 1/2" .530 knurl (GM Truck)

$17.50

8138

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8176 - 1/2" - 20 x 1 3/4" (Quick Start end) .565" knurl Lincoln

$17.50

8176

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8235 - 1/2" - 20 x 1 1/2""(Quick Start end) .615" knurl

$17.50

8235

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8250 - 1/2 - 20 x 1 15/16" .625" knurl

$17.50

8250

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8254 - 12mm x 1 1/2" .505" knurl Chevy 12mm

$17.50

8254

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8255 - 12mm x 2 1/2" .505" knurl Long Chevy 12mm

$22.50

8255

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8259 - 7/16" - 20 x 1 3/4" .480" Knurl Press-In Stud

$17.50

8259

Thread: 7/16" - 20
Length: 1 3/4"
Knurl: .480"

Add To Cart
Part # 8328 - 14mm x 1 11/16" .620 knurl

$17.50

8328

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8364 - 1/2" - 20 x 1 7/16" .610 knurl Jeep TJ

$17.50

8364

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8390 - 12mm x 1 3/4" .580 knurl

$17.50

8390

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 9000 - C-Clip Eliminators for GM 10 Bolt & 12 Bolt Axles with 1.533" bearing seat.

$160.00

9000

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9200 - C-Clip Eliminators for GM 10 Bolt & 12 Bolt axles except Impalas & Trucks

$160.00

9200

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 9300 - C-Clip Eliminators for 1979-2004 7.5" & 8.8" Mustang, Capri & Fox Bo

$160.00

9300

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 9333 - C-Clip Eliminators for 1979-2004 Ford Mustang, Capri & Fox Body Fords.

$160.00

9333

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A28-86AERO - 1986-97 Aerostar - 28 Spline C-Clip Axles

$260.00

A28-86AERO

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A28-66BRNS - 1966-75 Bronco - Small Bearing - 28 Spline

$370.00

A28-66BRNS

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A31-66BRNS - 1966-75 Bronco - Small Bearing - 31 Spline

$370.00

A31-66BRNS

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A28-66BRNB - 1966-75 Bronco - Large Bearing - 28 Spline

$370.00

A28-66BRNB

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A31-66BRNB - 1966-75 Bronco - Large Bearing - 31 Spline

$370.00

A31-66BRNB

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A28-74BRNB - 1974-75 Bronco - Large Bearing w/ 10" Drum Brake - 28 Spline

$370.00

A28-74BRNB

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A31-74BRNB - 1974-75 Bronco - Large Bearing w/ 10" Drum Brake - 31 Spline

$370.00

A31-74BRNB

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A28-76BRNB - 1976-77 Bronco - Large Bearing - 28 Spline

$370.00

A28-76BRNB

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A31-76BRNB - 1976-77 Bronco - Large Bearing - 31 Spline

$370.00

A31-76BRNB

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A31-83BRON - 1983-86 Bronco (2WD & 4WD) - 31 Spline C-Clip Axles

$370.00

A31-83BRON

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-87BRON - 1987-96 Bronco (2WD & 4WD) - 31 Spline C-Clip Axles

$370.00

A31-87BRON

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A28-83BRN2 - 1983-92 Bronco II (4WD) - 28 Spline C-Clip Axles

$260.00

A28-83BRN2

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-90EXPL - 1990 1/2-94 Explorer - 31 Spline C-Clip Axles

$370.00

A31-90EXPL

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-95EXPL - 1995-Newer Explorer C-Clip Axles - 31 Spline

$370.00

A31-95EXPL

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-74F150 - 1974-86 F-150 & E-150 (van) Axles - 31 Spline

$370.00

A31-74F150

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A34-97F150 - 1997-99 F-150, Expedition, Navigator 2WD & 4WD (9 3/4" Rear End) 34 Spl

$370.00

A34-97F150

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-97F150 - 1997-Newer F-150, Expedtion, Navigator 2WD & 4WD Spline 31

$370.00

A31-97F150

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A28-70LINC - 1970-79 Lincoln Continental (Disc Brakes) 28 Spline

$370.00

A28-70LINC

Length- 29 1/2" & 32" Bolt Pattern- 5 X 5" Rear Type- 9"

Add To Cart
Part # A3170LINC - 1970-79 Lincoln Continental Axles (Disc Brakes) 31 Spline

$370.00

A31-70LINC

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2877VERS - 1977-80 Lincoln Versailles (Disc Brakes) 28 Spline

$370.00

A28-77VERS

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A3177VERS - 1977-80 Lincoln Versailles (Disc Brakes) 31 Spline

$370.00

A31-77VERS

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2864MUST - 1964-66 Mustang Axles (DS & PS) 28 Spline

$370.00

A28-64MUST

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A3164MUST - 1964-66 Mustang (DS & PS) 31 Spline

$370.00

A31-64MUST

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2867MUST - 1967-70 Mustang (DS & PS) 28 Spline

$370.00

A28-67MUST

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A3167MUST - 1967-70 Mustang Axles (DS & PS) 31 Spline

$370.00

A31-67MUST

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2871MUST - 1971-73 Mustang Axles (DS & PS) 28 Spline

$370.00

A28-71MUST

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A28-83RANG - 1983-92 Ranger (2WD & 4WD) 28 Spline

$260.00

A28-83RANG

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-83RANG - 1983-92 Ranger (2WD & 4WD) Spline 31

$260.00

A31-83RANG

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A28-93RANG - 1993-97 Ranger (2WD & 4WD) Spline 28

$260.00

A28-93RANG

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-93RANG - 1993-97 Ranger (2WD & 4WD) Spline 31

$260.00

A31-93RANG

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A3070GMT2 - 1970-81 GM Truck (2WD) 30 Spline

$260.00

A30-70GMT2

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Add To Cart
Part # A3070GMT4 - 1970-81 GM Truck (4WD) Spline 30

$260.00

A30-70GMT4

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Add To Cart
Part # A3065GMT5 1965-69 GM Truck (2WD & 4WD) Spline 30

$260.00

A30-65GMT5

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2879GMTK - 1981-88 GM Truck (2WD) Spline 28

$260.00

A28-79GMTK

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A28-81GMTK - 1981-88 GM Truck (4WD) Spline 28

$260.00

A28-81GMTK

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A30-89GMTK - 1988-98 GM Truck (2WD) Spline 30

$260.00

A30-89GMTK

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A30-CST-A4- A-Body, 8 3/4" Rear, Stock A-Body Drum Brake -- 30 Spline

$370.00

A30-CST-A4

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A30-CST-A45 - A-Body, 8 3/4" Rear Axle Shafts, Stock A-Body Drum Brake (Redrilled) -- 30

$370.00

A30-CST-A45

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A30-CST-AB45 - A-Body, 8 3/4" Rear, B-Body Drum Brake -- 30 Spline

$370.00

A30-CST-AB45

Length- 28" (2) Bolt Pattern- 5 X 4 1/2" Rear Type- 8 3/4"

Add To Cart
Part # A30-CST-B67 - 1964-67 B-Body Axles, 8 3/4" Rear, Stock Drum Brake -- 30 Spline

$370.00

A30-CST-B67

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A30-CST-B68 - 1968-70 B-Body, 8 3/4" Rear Axles, Stock Drum Brake -- 30 Spline

$370.00

A30-CST-B68

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



Add To Cart
Part # A23-68CHRG-60 - 1968-70 B-Body, Dana-60 Rear Axles, Stock Drum Brake -- 23 Spline

$370.00

A23-68CHRG-60

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A35-68CHRG-60 - 1968-70 B-Body, Dana-60 Rear Axles, Stock Drum Brake -- 35 Spline

$370.00

A35-68CHRG-60

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



Add To Cart
Part # A30-CST-B71 - 1971-74 B-Body, 8 3/4" Rear Axles, Stock Drum Brake -- 30 Spline

$370.00

A30-CST-B71

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-74RAMC - 1974-79 Ram Charger, 100 & 150 Series P/U Axles (4WD) 1975-83 (2WD) -- 31 Sp

$370.00

A31-74RAMC

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-84RAMC - 1984-93 Ram Charger, 100 & 150 Series P/U, 2WD & 4WD -- Spline 31

$370.00

A31-84RAMC

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A31-94RAMC - 1994-02 Dodge Ram, 1500 Series P/U, 2WD & 4WD -- Spline 31

$370.00

A31-94RAMC

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A29-98DURA - 1998-03 Dodge Durango, 1997-04 Dakota Axles -- 29 Spline

$370.00

A29-98DURA

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A3071SCOT - 1968-71 1/2 1973 1/2-78 International Scout Axles -- 30 Spline

$370.00

A30-71SCOT

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # 8080 - 5/8" - 18 X 3" Drive Stud Kit

$80.00

8080

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9508M - SKF Big Ford & Olds/Pontiac Ball Bearing

$65.00

9508M

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9508T - Big Ford & Olds/Pontiac Ball Bearing

$65.00

9508T

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9508H - Big Ford & Olds/Pontiac Ball Bearing (1.771" ID)

$65.00

9508H

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9400M - 8 3/4" Mopar/Dana 60 (Non-adjustable) w/snap ring

$65.00

9400M

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9400RP - 8 3/4" Mopar/Dana 60 (Non-adjustable) w/o snap ring

$65.00

9400RP

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9507F - Small Ford - Stock ID

$65.00

9507F

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9507B - Small Ford - Aftermarket ID

$65.00

9507B

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9507T - Small Ford - Aftermarket ID

$65.00

9507T

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9563 - 1.400" C-Clip Axle Bearing & Seal Set

$30.00

9563

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9559 - 1.618" C-Clip Axle Bearing & Seal

$40.00

9559

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9CJ57 - Jeep Ball Bearing

$65.00

9CJ57

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9507M - C-Clip Eliminator Bearing (9333)

$65.00

9507M

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9507S - C-Clip Eliminator Bearing (for 9200 & 9300)

$65.00

9507S

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9507M - C-Clip Eliminator Bearing (for 9333)

$65.00

9507M

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9507C - BOP Ball Bearing

$65.00

9507C

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Tapered Bearing Package up to 1/2" Studs

$160.00

BPTB

Order a bearing package with your axles and save money!! The package includes: Ball Bearings or tapered roller bearings with 1/2" or 5/8" drive studs and retainer plates!

Add To Cart
Tapered Bearing w/ 5/8" drive studs

$205.00

BPTD

Order a bearing package with your axles and save money!! The package includes: tapered roller bearings with 5/8" drive studs and retainer plates!

Add To Cart
Part # ASP1 - Spool & Axle Package (Bolt-In Axles)

$610.00

ASP1

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



**Axles with the following features will ship three business days after online transaction is completed: Gun Drilling, Star Flanging or Lightening Holes

Add To Cart
9700 - Retainer Plates 1979-04 8.8" Ford Mustang

$15.00

9700

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9705 - Retainer Plates for aftermarket Bolt-In axles for 2005-10 Mustang

$15.00

9705

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9750 - Retainer Plates Small Ford & Big Bearing Torino

$15.00

9750

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9800 - Big Ford Retainer Plate

$15.00

9800

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9850 - Retainer Plates 1949-1964 Olds/Pontiac

$15.00

9850

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9900- Retainer Plates Chevy 10/12 Bolt Car (except Truck & Impala)

$15.00

9900

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9900TB - Retainer PlatesChevy Car with Timken Tapered Bearing

$15.00

9900TB

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9950 - 10/12 Bolt Impala & Truck

$15.00

9950

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Truck Full Floater Custom Alloy Axles

$370.00

Hi-Performance, non-tapered floater axles are available in 16 - 35 spline combinations for 3/4 and one ton trucks. The axles can be made in any length up to 39 5/8" and with any 8 lug pattern. These axles are forged and induction hardened utilizing our superior Custom Alloy material. MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This part number represents 1 pair (2) axles.
Click on the hyperlink below for the Axle Order Form!

Add To Cart
Hobby Stock Circle Track Axles

$465.00

CTHOBBYSTKAXLES

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Hobby Stock Circle Track Axle Package

$695.00

CTHOBBYSTKPKG

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # CJQ - Moser one-piece Jeep Axle Kit Fits: 1976-79 CJ7 w/Quadratrac

$305.00

CJQ

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # CJL - Moser one-piece Jeep Axle Kit - Fits1982-86 CJ7

$305.00

CJL

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # CJS - Moser one-piece Jeep Axle Kit Fits: 1976-83 CJ5 & 1976-81 CJ7

$305.00

CJS

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 838TK - 3/8" T-Bolt Kit

$15.00

838TK

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 812TK - 1/2" T-Bolt Kit

$15.00

812TK

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # ASP2 - Spool & Axle Package (C-Clip Eliminator Type)

$575.00

ASP2

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



**Axles with the following features will ship three business days after online transaction is completed: Gun Drilling, Star Flanging or Lightening Holes

Add To Cart
Part # ASP3 - Spool & Axle Package (40 Spline Only)

$705.00

ASP3

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



**Axles with the following features will ship three business days after online transaction is completed: Gun Drilling, Star Flanging or Lightening Holes

Add To Cart
Part # LAGD - Gun Drill Axle - Lightening Option

$100.00

LAGD

*This procedure adds an additional day to the order processing!

Add To Cart
Part # A40EXT - Custom Length Alloy Pro Extreme 40 Spline Axles

$615.00

A40EXT

MADE THE AMERICAN WAY IN THE USA!



*This item will ship three business days after online transaction is completed.



This part number represents 1 pair (2) axles only.

Add To Cart
Part # D44-CST-OT - MOSER MAX DANA 44 CUSTOM OUTER AXLE SHAFT

$140.00

D44-CST-OT

The Max - Moser 44 Front Performance Axles are Forged from aircraft quality 4140 Alloy and Induction Heat Treated Here in the USA! (19 Spline standard) *This item will ship two business days after online transaction is completed. The price and part number represents a single outer (stub) axle. If you want a pair of outer axles (one for each side) you will need to order a quantity of 2. Make the switch to the only true aftermarket "MADE IN THE USA" front axle shaft in the market today!

Add To Cart
Part # 9550 - Full Circle Clips for use with Moser MAX Dana 44 Axles

$3.00

9550

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Sold as each.

Add To Cart
5U760 - Spicer U-Joint for Dana 44 Front Axle Shafts

$35.00

5U760

SAME DAY SHIPPING (if ordered before 2pm EST)
Sold as Each.

Add To Cart
Part # D60-CST-OT - MOSER MAX DANA 60 CUSTOM OUTER AXLE SHAFT

$172.50

D60-CST-OT

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
The price and part number represents a single inner axle. If you want a pair of axles (one for each side) you will need to order a quantity of 2.
Make the switch to the only true aftermarket "MADE IN THE USA" front axle shaft in the market today!

Add To Cart
Part # D60-CST-IN - MOSER MAX DANA 60 CUSTOM INNER AXLE SHAFT

$252.50

D60-CST-IN

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
The price and part number represents a single inner axle. If you want a pair of axles (one for each side) you will need to order a quantity of 2.
Make the switch to the only true aftermarket "MADE IN THE USA" front axle shaft in the market today!

Add To Cart
Part # D44-CST-IN - MOSER MAX DANA 44 CUSTOM INNER AXLE SHAFT

$210.00

D44-CST-IN

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
The price and part number represents a single inner axle. If you want a pair of axles (one for each side) you will need to order a quantity of 2.
Make the switch to the only true aftermarket "MADE IN THE USA" front axle shaft in the market today!

Add To Cart
Part # 5U806 - Spicer U-Joint for use w/Dana 60 Front Axle Shafts

$65.00

5U806

SAME DAY SHIPPING (if ordered before 2pm EST)
Sold as Each.

Add To Cart
Part # A102601CT - 10 Bolt 26 spline - Fits 1978-81 Cutlass, El Camino, Grand Prix, Monte Carlo, Reg

$260.00

A102601CT

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*This set of axles comes with an additional 5 x 5" Bolt Pattern for circle track studs.



**This product is not classified as a Circle Track Product and does not qualify for the Moser "Buy Once. Race Forever." Warranty Program.

Add To Cart
Part # A3079GMTK - 1981-88 GM Truck (2WD) 30 Spline

$260.00

A30-79GMTK

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
CJTBK-1/2 - Jeep Model 20 Replacement Tapered Bearing Kit (1-Side Only)

$42.50

CJTBK-1/2

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
CJTBK - Jeep Model 20 Replacement Tapered Bearing Kit

$85.00

CJTBK

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # M30-CST-A4- A-Body, 8 3/4" Rear OEM Axles, Stock A-Body Drum Brake -- 30 Spline

$250.00

M30-CST-A4

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # M30-CST-A45 - A-Body, 8 3/4" Rear OEM Axle Shafts, Stock A-Body Drum Brake (Redrilled) -

$250.00

M30-CST-A45

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # M30-CST-AB45 - A-Body, 8 3/4" Rear OEM Axles, B-Body Drum Brake -- 30 Spline

$250.00

M30-CST-AB45

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # M30-CST-B67 - 1964-67 B-Body, 8 3/4" Rear OEM Axles, Stock Drum Brake -- 30 Spline

$250.00

M30-CST-B67

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # M30-CST-B68 - 1968-70 B-Body, 8 3/4" Rear OEM Axles, Stock Drum Brake -- 30 Spline

$250.00

M30-CST-B68

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



Add To Cart
Part # M30-CST-B71 - 1971-74 B-Body, 8 3/4" Rear OEM Axles, Stock Drum Brake -- 30 Spline

$250.00

M30-CST-B71

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # M30-CST-E70 - 1970-74 E-Body, 8 3/4" Rear OEM Axles, Stock Drum Brake -- 30 Spline

$250.00

M30-CST-E70

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A41 - Moser Circle Track Axles

$89.00

A41

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9510 - Timken Set 10 Tapered Roller Bearing

$85.00

9BR10

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 9559HD - 1.618" C-Clip Axle Bearing & Seal

$60.00

9559HD

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # UADP - Moser Ultimate 9" 31 Spline Axle & Diff pkg (Alloy 31 Spline Axles)

Sale

$1,575.00

$1,375.00

UADP

MADE THE AMERICAN WAY IN THE USA!



This part number includes:



1 - pair of custom alloy 31 spline axles

1 - 31 spline Wavetrac unit

1 - complete setup kit for your center section

1 - bearing package (axle bearings, retainers and studs up to 1/2" by 3" long -5/8 studs available for an upgrade) (tapered bearings are an upgrade also)

Add To Cart
A883103 - 8.8" Ford 31 spline - 2003-04 Mercury Marauder, 5 lug with ABS adapter

$425.00

A883103

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings

Add To Cart
945M - 45mm Tapered Roller Bearing

$130.00

945M

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A102809-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1962-67 Nova

$137.50

A102809-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102802-1 - 10 Bolt 28 Spline C-Clip Axle - Fits 1967-69 Camaro, 1965-67 Chevelle, 1968-76 No

$137.50

A102802-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A103002-1 - 10 Bolt 30 Spline C-Clip Axle - Fits 1970-76 Nova

$137.50

A103002-1

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102811-1 - 10 Bolt 28 Spline C-Clip Axle - Fits 1966-70 Impala

$137.50

A102811-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Bearing Seat: 1.618" OD



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A123004-1 - 12 Bolt 30 Spline C-Clip Axle - Fits 1966-70 Impala

$137.50

A123004-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Bearing Seat 1.618

Add To Cart
Part # A102803-1 - 10 Bolt 28 Spline C-Clip Axle - Fits 1970-81 Camaro, 1968-72 Chevelle, El Camino,

$137.50

A102803-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A103003-1 - 10 Bolt 30 Spline C-Clip Axle - Fits 1971-81 Camaro, 1970-72 Chevelle

$137.50

A103003-1

MADE THE AMERICAN WAY IN THE USA!
SAME DAY SHIPPING (if ordered before 2pm EST).
*Requires aftermarket 30 spline carrier!
Single Axle fits Driver or Passenger Side

Add To Cart
Part # A123003-1 - 12 Bolt 30 spline C-Clip Axle- Fits 1970-72 Camaro, 1968-72 Chevelle, El Camino,

$137.50

A123003-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102812-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1973-77 Chevelle, El Camino, Malibu, Monte C

$137.50

A102812-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A103012-1 - 10 Bolt 30 spline C-Clip Axle - Fits 1973-77 Chevelle, El Camino, Malibu, Monte C

$137.50

A103012-1

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102601-1 - 10 Bolt 26 spline C-Clip Axle - Fits 1978-81 Cutlass, El Camino, Grand Prix, Mont

$137.50

A102601-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102801-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1978-81 Cutlass, El Camino, Grand Prix, Mont

$137.50

A102801-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102602-1 - 10 Bolt 26 Spline C-Clip Axles - Fits 1982-87 Cutlass, El Camino, Grand Prix, Mon

$137.50

A102602-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102810-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1982-87 Cutlass, El Camino, Grand Prix, Mont

$137.50

A102810-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Requires 28 Spline Aftermarket Differential



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102808-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1984-88 Buick Grand National, Olds Hurst

$137.50

A102808-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A103004-1 - 10 Bolt 30 spline C-Clip Axle - Fits 1984-88 Buick Grand National, Olds Hurst

$137.50

A103004-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Requires 30 Spline Aftermarket Differential



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102604-1 - 10 Bolt 26 spline C-Clip Axle - Fits 1982-92 Camaro and Trans-Am

$137.50

A102604-1

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102804-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1982-92 Camaro and Trans-Am

$137.50

A102804-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102607-1 - 10 Bolt 26 spline C-Clip Axle - Fits 1982-02 S-10, S-15 (2WD)

$137.50

A102607-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102807-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1982-02 S-10, S-15 (2WD)

$137.50

A102807-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102613-1 - 10 Bolt 26 spline C-Clip Axle - Fits 1982-02 S-10, S-15 (4WD)

$137.50

A102613-1

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102813-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1982-02 S-10, S-15 (4WD)

$137.50

A102813-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A103001-1 - 10 Bolt 30 spline C-Clip Axle - Fits 1993-96 Caprice B4U, 1994-96 Impalla SS

$137.50

A103001-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*There are more than a few variations to these applications, to insure correct fit remove the OEM axles and measure before ordering.



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A103005-1 - 10 Bolt 30 spline C-Clip Axles - Fits 1991-92 Caprice & Roadmaster, 1993-96 C

$137.50

A103005-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*There are more than a few variations to these applications, to insure correct fit remove the OEM axles and measure before ordering.



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102805-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1993-02 Camaro and Trans-Am w/ 3 Channel ABS

$137.50

A102805-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Works with both 3-Channel ABS or Vehicles without ABS.



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A102806-1 - 10 Bolt 28 spline C-Clip Axle - Fits 1993-02 Camaro and Trans-Am w/ 4 Channel ABS

$165.00

A102806-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



*Prepped for OEM Reluctor Rings



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A882841-1 - 8.8" Ford 28 spline C-Clip Axle - Fits 1979-93 Mustang (4-lug)

$137.50

A882841-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Part # A883141-1 - 8.8" Ford 31 spline C-Clip Axle - Fits 1979-93 Mustang (4-lug)

$137.50

A883141-1

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)



Single Axle fits Driver or Passenger Side

Add To Cart
Custom Length C-Clip Axles

$370.00

C33CST

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 2 Axles.

Add To Cart
Custom Length C-Clip Axles

$155.00

C28CST-1

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 1 Axle.

Add To Cart
custom Length C-Clip Axles

$295.00

C26CST

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 2 Axles.

Add To Cart
Custom Length C-Clip Axles

$155.00

C31CST-1

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 1 Axle.

Add To Cart
C30CST-1 -Custom Length C-Clip Axles

$155.00

C30CST-1

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 1 Axle.

Add To Cart
Custom Length C-Clip Axles

$195.00

C33CST-1

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 1 Axle.

Add To Cart
Custom Length C-Clip Axles

$295.00

C31CST

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 2 Axles.

Add To Cart
custom Length C-Clip Axles

$155.00

C26CST-1

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 1 Axle.

Add To Cart
Custom Length C-Clip Axles

$295.00

C28CST

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 2 AxleS.

Add To Cart
Part # C30CST -Custom Length C-Clip 30 Spline Axles

$295.00

C30CST

MADE THE AMERICAN WAY IN THE USA!
*This item will ship two business days after online transaction is completed.
This item is for 2 Axles.

Add To Cart
Part # A883151SN  - 8.8" Ford 31 spline - Fits 1979-93 Mustang (5-lug) WITH NORTH RACECARS DISC

$260.00

A883151SN

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A882851SN  - 8.8" Ford 28 spline - Fits 1979-93 Mustang (5-lug) WITH NORTH RACECARS DISC

$260.00

A882851SN

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A883151ASN  - 8.8" Ford 31 spline - Fits 1979-93 Mustang (5-lug) WITH NORTH RACECARS DIS

$260.00

A883151ASN

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A3097TJ44 - 1997-2006 Jeep TJ Dana 44 Axles -- 30 Spline

$370.00

A30-97TJ44

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A3397TJ44 - 1997-2006 Jeep TJ Dana 44 Axles -- 33 Spline

$370.00

A33-97TJ44

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A3597TJ44 - 1997-2006 Jeep TJ Dana 44 Axles -- 35 Spline

$370.00

A35-97TJ44

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.

Add To Cart
Part # A30-99GMTK - 1999-08 GM Truck (2WD & 4WD) Spline 30

$260.00

A30-99GMTK

MADE THE AMERICAN WAY IN THE USA!



Order will ship 2 - business days after order completion!

Add To Cart
Part # A30-88GMTK - 1980-98 GM Truck (4WD) Spline 30

$260.00

A30-88GMTK

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9547 - 1.618" C-Clip Axle Bearing & Seal

$100.00

9547

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2864MUST-D - 1964-66 Mustang Axle (Driver Side Only) 28 Spline

$195.00

A28-64MUST-D

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2864MUST-P - 1964-66 Mustang Axle (Passenger Side Only) 28 Spline

$195.00

A28-64MUST-P

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2867MUST-D - 1967-70 Mustang (Driver Side Axle) 28 Spline

$195.00

A28-67MUST-D

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A2867MUST-P - 1967-70 Mustang (Passenger Side Axle) 28 Spline

$195.00

A28-67MUST-P

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8083 - 5/8" - 11 x 4" (Quick Start end) .685" knurl (Set of 10 Studs)

$30.00

8083

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8083-1 - 5/8" - 11 x 4" (Quick Start end) .685" knurl (1 Individual Stud)

$3.00

8083-1

This part number represents 1 individual stud.



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8082-1  5/8"- 18 x 2 1/2" (Quick Start end) .685" knurl (1 Individual Stud)

$4.50

8082-1

This part number represents 1 individual stud.



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # 8081-1  5/8" - 11 x 2 1/2" (Quick Start End) .685" knurl (1 Individual Stud)

$3.00

8081-1

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
LAH (Labor Access Hole)

$20.00

LAH

Labor charge for drilling Access Holes in the flanges to gain easier or required (on some disc brake applications) to the T-bolts that hold the backing plate or caliper bracket to the housing end. This service allows a socket to be used in conjunction with an extension to pass through the axle flange and tighten the nuts.

Add To Cart
9BR20 - SKF Set 20 Tapered Roller Bearing

$115.00

9BR20

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
9BR20-1 - SKF Set 20 Tapered Roller Bearing (single bearing)

$57.50

9BR20-1

SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # JD1000K - Junior Dragster Axle Assembly (16" Axle)

$495.00

JD1000K

MADE THE AMERICAN WAY IN THE USA!



SAME DAY SHIPPING (if ordered before 2pm EST)

Add To Cart
Part # A883142A - 8.8" Ford 31 spline - Fits 1993 Mustang Cobra 4 lug (For Auburn LSD)

$260.00

A883142A

MADE THE AMERICAN WAY IN THE USA!



*This item will ship two business days after online transaction is completed.



**For use with Auburn Limited-Slip Differential only!

Add To Cart
Part # 8000-1 - 1/2"- 20 x 3" Screw-In Stud

$2.25

8000-1

SAME DAY SHIPPING (if ordered before 2pm EST)



Add To Cart
Part # BPBB - Bearing, Stud & Retainer Package

$100.00

BPBB

Studs and bearings installed at no additional charge!

Add To Cart